Print Server Settings - Canon LASER SHOT LBP3500 User Manual

When using a print server, perform the following settings:
Install the printer driver on the print server
When the printer and print server are connected by
the USB cable
1
When the optional network board is installed and the
printer and print server are connected by the LAN
cable
2

Print Server Settings

3 Installation on Clients
NOTE
Using this printer on your network requires that both the print server and clients should
be using Windows 98/Me or Windows 2000/XP/Server 2003.

Print Server Settings

This section describes the procedure assuming that the print server is running
Windows 2000/XP/Server 2003.
NOTE
If you configure the sharing function of the print server or clients that are running
•
Windows 98/Me, use the following procedure.
1. Double-click [My Computer] ➞ [Control Panel] ➞ the [Network] icon.
2. Display the [Configuration] sheet, then click [Add].
3. Select the [Service] icon, then click [Add].
4. Select [File and printer sharing for Microsoft Networks], then click [OK].
5. Click [File and Printer Sharing], make sure that [I want to be able to allow others to
print to my printer(s).] is selected, then click [OK].
6. Display the [Access Control] sheet, select [Share-level access control] or
[User-level access control], and then click [OK] to restart Windows.
7. After Windows restarts, from the [Start] menu, select [Settings] ➞ [Printers].
8. Right-click the icon for this printer, then select [Sharing] from the pop-up menu.
9. Select [Shared As]. Change [Share Name] if you want to, then enter [Comment]
and [Password] as needed.
10. Click [OK].
The screen shots used in this section are from Windows XP Professional.
•
Setting
Printing from a Network Computer by Sharing the Printer on a Network
See
See p. 3-4
See Network Guide
See p. 3-53
See p. 3-60
3-53
3