Adjusting The Color Balance - Xerox WorkCentre 7425 User Manual

Copying

Adjusting the Color Balance

If you have a color original, you can adjust the balance between the primary printing colors (cyan,
magenta, yellow and black).
To adjust the color balance:
1. Touch Copy on the touch screen, then touch the Image Quality tab.
2. Touch Color Balance.
3. To adjust the highlight, midtone, and shadow density levels by color:
a. Touch the desired color.
b. Touch the up or down arrows to adjust the levels for highlights, midtones, and shadows.
c. Repeat steps 3a and 3b for each color.
4. Touch Save.
Adjusting the Color Shift
If you have a color original, you can adjust the hue of the copy colors.
To adjust the color balance:
1. Touch Copy on the touch screen, then touch the Image Quality tab.
2. Touch Color Shift. The Original Color bar represents the colors of the original document. The Copy
Color bar represents the copy colors.
3. Touch one of the five buttons from Minus to Plus to select the desired color shift.
4. Touch Save.
This feature is only available when the output color is set to Auto Detect or Color.
Note:
Selecting the Gloss Level
The gloss level can be enhanced to create glossier copies.
To adjust the gloss level:
1. Touch Copy on the touch screen, then touch the Image Quality tab.
2. Touch Gloss Level.
3. Touch Normal for normal gloss or Enhanced for glossier copies.
4. Touch Save.
96 WorkCentre 7425/7428/7435
User Guide