Printer Is Making Unusual Noises
Probable Causes
The printer is not level.
The tray is not installed correctly.
There is an obstruction or debris inside the printer.
The Date and Time Are Incorrect
Probable Causes
Did you set the correct date and time?
Duplex Problems
Probable Causes
Media or settings are not correct.
Solutions
Place the printer on a flat, hard, level surface.
Open and close the tray you are printing from.
Turn off the printer and remove the obstruction or
debris. If you cannot remove it, contact your local
Xerox service representative.
Solutions
Ensure you have set the correct Date and Time on the
control panel or through CentreWare IS.
Solutions
Make sure that you are using correct media. Do not
duplex custom-sized media, transparencies,
envelopes, labels, plain reload, lightweight, HW
reload, extra HW, HW gloss or HW gloss reload.
In the printer driver choose 2-Sided Printing.
WorkCentre 7425/7428/7435
General Troubleshooting
195
User Guide