Connecting External Options - IBM NetVista X40 User Manual

Note: The illustrations in this document might differ slightly from your hardware.
Complete the following steps to install the computer cover.
1. Clear any cables that might impede the replacement of the cover.
2. Position the cover over the computer and pivot the cover down until the cover
3. Lock the cover, if required.
4. Reconnect the external cables and power cords to the computer; then, plug the
5. Turn on all attached devices; then, turn on the computer.

Connecting external options

You can attach a SCSI storage expansion enclosure to your computer.
To attach an external device:
1. Read "Before you begin" on page 37, review the safety precautions listed in
2. Be sure your computer and all attached devices are turned off.
3. Follow the instructions that come with the option to prepare it for installation
® ®
70
IBM IntelliStation E Pro: User's Guide IntelliStation E Pro Types 6836, 6846
snaps into place.
power cords into electrical outlets.
Statement 1 and Statement 5 in "Safety information" on page 39, and read the
documentation that comes with your options.
and to connect it to the computer.
Note: If you are attaching a SCSI device, see "Ultra160 SCSI connector (some
models)" on page 75 for SCSI ID and cabling information.