IBM NetVista X40 User Manual page 101

Code Function
Microprocessor
175 System thermal
180 Status display
201 System memory
Result Text message
Failed VRM corresponding to microprocessor in socket
xyzis defective
(where xyz identifies the microprocessor whose
VRM is causing the error message)
VRM corresponding to microprocessor in socket id
xyz is not installed
(where xyzidentifies the microprocessor whose
VRM is causing the error message)
Failed Fan # n
(where n is the number of the failing fan)
Temperature sensed on processor board is out of
range
Failed Any failure message
Failed DIMMs in location DIMM n
(where nis the number of the socket that contains
the failing DIMM)
Test setup error: Corrupt BIOS in ROM
Test setup error: Corrupt DMI BIOS, information
in BIOS is not as expected
Action
Replace the VRM.
If the problem remains,
call for service.
Install a VRM.
If the problem persists,
call for service.
Replace the indicated
fan.
Call for service.
Call for service.
1. Reseat the failing
DIMM.
2. If the problem
remains, replace the
DIMM.
If the problem
persists, call for
service.
If your system does not
have the latest level
BIOS installed, update
the BIOS to the latest
level.
If the problem persists,
call for service.
Chapter 6. Solving problems
85