Getting Information, Help, And Service - IBM NetVista X40 User Manual

Complete the following steps to replace the battery.
1. Read "Before you begin" on page 37, and follow any special handling and
2. Remove any media (diskettes, CDs, or tape) from the drives and shut down
3. Turn off the computer and attached devices and disconnect all external cables
4. If necessary, unlock the computer cover; then, remove the computer cover. See
5. Do the following to remove the battery:
6. Do the following to insert the new battery:
7. Reinstall the cover, see "Installing the cover" on page 58 for the tower model.
8. Reconnect the external cables and power cords; then turn on the attached
9. Start the Configuration/Setup Utility program and set configuration

Getting information, help, and service

If you need help, service, technical assistance, or just want more information about
IBM products, you will find a wide variety of sources available from IBM to assist
you.
This section contains information about where to go for additional information
about IBM and IBM products, what to do if you experience a problem with your
computer, and whom to call for service should it be necessary.
® ®
104
IBM IntelliStation E Pro: User's Guide IntelliStation E Pro Types 6836, 6846
installation instructions supplied with the replacement battery.
your operating system.
and power cords.
"Removing the side cover" on page 45 for the tower model and see "Installing
the cover" on page 58 for the desktop model.
a. Press the battery release tab to release the battery from the socket.
b. Lift the battery out of the socket.
a. Tilt the battery so that you can insert it into the socket.
b. Press down on the battery after you insert it into the socket.
See "Installing the cover" on page 69 for the desktop model.
devices and the computer.
parameters.
v Set the system date and time.
v Set the power-on password.
v Reconfigure your system.