Copyright Ibm Corp; Chapter 4. Configuring Your Computer; Using The Configuration/Setup Utility Program; Starting The Configuration/Setup Utility Program - IBM NetVista X40 User Manual

Chapter 4. Configuring your computer

The following configuration programs are provided with your computer:
v Configuration/Setup Utility program
v SCSISelect Utility program (some models)

Using the Configuration/Setup Utility program

This section provides the instructions for starting the Configuration/Setup Utility
program and descriptions of the menu choices that are available.

Starting the Configuration/Setup Utility program

Complete the following steps to start the Configuration/Setup Utility program.
1. Turn on the computer and watch the monitor screen.
2. When the message
3. Follow the instructions that appear on the screen.
Choices available from the Configuration/Setup Utility main
menu
From the Configuration/Setup Utility main menu, you can select settings that you
want to change. The Configuration/Setup Utility main menu is similar to the
following:
© Copyright IBM Corp. 2000
This program is part of the BIOS code that comes with your computer. You can
use this program to configure serial- and parallel-connector assignments, change
the drive startup sequence, set the date and time, set passwords, and set the
chassis-intrusion alert. See "Using the Configuration/Setup Utility program" on
page 27 for more information.
With the built-in SCSISelect Utility program, you can configure the devices that
are attached to the SCSI adapter. See "Using the SCSISelect Utility program
(some models)" on page 30 for more information.
CMOS Setup Utility - Copyright (c) 1984 - 2000 Award Software
Configuration/Setup Utility
Select Option:
System Summary
Product Data
Devices & I/O Ports
Start Options
Frequency Control
Date and Time
System Security
Advanced Setup
Power Management Setup
Move
Save & Exit Setup
Load Optimized Defaults
Exit Without Saving
Enter: Select F1: General Help
F10: Save
appears, press F1.
ESC: Exit
27