Complete the following steps to replace the side cover:
1. Make sure that all cables, adapters, and other components are installed and
2. Install the side cover by placing it into position on the computer. Be certain that
3. Reconnect the external cables and power cords to the computer; then, connect
4. Turn on the attached devices; then, turn on the computer.
Connecting external options
You can connect a number of optional external devices to the connectors on the
rear and front of the computer.
Complete the following steps to attach an external device:
1. Review the "Installation guidelines" on page 31, the safety precautions listed in
2. Turn off the computer and all attached devices (see "Turning off the computer"
3. Follow the instructions that come with the option to prepare it for installation and
If you are attaching a SCSI device, see "Ultra320 SCSI connector" on page 72 for
SCSI ID and cabling information.
68
IBM IntelliStation M Pro Types 6220 and 6230: Hardware Maintenance Manual
seated correctly and that you have not left loose tools or parts inside the
computer.
the lip on the bottom of the cover rests on the ledge on the bottom of the
chassis before rotating the cover up to the vertical position. Press down on the
cover-release latch as you slide the side cover forward to lock the side cover.
the power cords to electrical outlets.
Statement 1 and Statement 5 in the safety information on page 129, and the
documentation that comes with your options.
on page 10).
to connect it to the computer.
94
13