Replacing The Side Cover; Connecting External Options - IBM 6225 User Manual

Replacing the side cover

Complete the following steps to replace the side cover:
1. Make sure that all cables, adapters, and other components are installed and
2. Install the side cover by placing it into position on the computer. Be certain that
3. Reconnect the external cables and power cords to the computer; then, connect
4. Turn on the attached devices; then, turn on the computer.

Connecting external options

You can connect a number of optional external devices to the connectors on the
rear and front of the computer.
Complete the following steps to connect an external device:
1. Read the safety information beginning on page vii, the guidelines in "Handling
2. Turn off the computer and all attached devices (see "Turning off the computer"
3. Follow the instructions that come with the option to prepare it for installation and
If you are attaching a SCSI device, see "Ultra320 SCSI connector" on page 53 for
SCSI ID and cabling information.
seated correctly and that you have removed all work tools or parts from inside
the computer.
the lip on the bottom of the cover rests on the ledge on the bottom of the
chassis. Slide the side cover forward to lock the side cover.
the power cords to electrical outlets.
static-sensitive devices" on page 29, and the documentation that comes with
your options.
on page 19).
to connect it to the computer.
Chapter 4. Installing options
49