IBM NetVista X40 User Manual page 102

Code Function
202 System cache
206 Diskette drive
215 CD-ROM
217 Hard disk drive
® ®
86
IBM IntelliStation E Pro: User's Guide IntelliStation E Pro Types 6836, 6846
Result Text message
Aborted Test setup error: BIOS cannot access VPD
information
Test setup error: Corrupt DMI BIOS, information
in BIOS is not as expected
Test setup error: No L2 cache detected on
microprocessor socket id xyz or BIOS setup
problem
(where xyz identifies the microprocessor that is
causing the error message)
Test setup error: Unknown hardware problem
associated with microprocessor in socket id xyz.
(where xyz identifies the microprocessor that is
causing the error message)
Failed Microprocessor in socket ID xyz
(where xyz identifies the microprocessor that is
causing the error message)
Warning Test setup error: Cache is disabled. Use system
setup to enable before retrying the test
Failed Internal diskette drive bay
Failed On system board.
Aborted The CD-ROM drive is not present.
Failed BIOS drive # n (where n is the drive bay number)
Action
If your system does not
have the latest level
BIOS installed, update
the BIOS to the latest
level and run the
diagnostic program
again.
If the problem persists,
call for service.
1. If your system does
not have the latest
level BIOS installed,
update the BIOS to
the latest level
2. Run the diagnostic
program again.
3. If the problem
remains, replace the
failing processor.
If the problem persists,
call for service.
1. Reseat the identified
microprocessor.
2. If the problem
remains, replace the
microprocessor.
If the problem persists,
call for service.
Use the Cache
Controlchoice from the
Advanced Setup menu
to enable the cache.
If the problem persists,
call for service.
Call for service.
Call for service.
Verify that the cables
are properly connected
to the CD-ROM drive.
If the problem persists,
call for service.
Call for service.