Table of Contents
Advertisement
Note: The illustrations in this document might differ slightly from your hardware.
Complete the following steps to install the computer cover:
1. Clear any cables that might impede the replacement of the cover.
2. Position the cover over the computer and pivot the cover down until the cover
3. Lock the cover.
4. Reconnect the external cables and power cords to the computer; then, plug the
5. Turn on all attached devices; then, turn on the computer.
Connecting external options
You can attach a SCSI storage expansion enclosure to your computer.
Installation procedure
To attach an external device:
1. Read "Before you begin" on page 29, review the safety precautions listed in
2. Be sure your computer and all attached devices are turned off.
3. Follow the instructions that come with the option to prepare it for installation
46
Hardware Maintenance Manual: IBM IntelliStation Type 6836, 6846
snaps into place.
power cords into electrical outlets.
"Safety information" on page 113, and read the documentation that comes with
your options.
and to connect it to the computer.
Note: If you are attaching a SCSI device, see "Ultra 3/160 SCSI connector
(some models)" on page 66 for SCSI ID and cabling information.
Advertisement
Table of Contents
