Replacing The Side Cover; Connecting External Options - IBM 6223 User Manual

Replacing the side cover

Complete the following steps to replace the side cover.
1. Before installing the cover, check that all cables, adapters, and other
2. Install the side cover by placing it into position on the computer. Make sure that
3. Reconnect the external cables and power cords to the computer.
4. Turn on the attached devices; then, turn on the computer.

Connecting external options

You can connect a number of optional external devices to the connectors on the
rear and front of the computer.
Complete the following steps to connect an external device:
1. Read the safety information beginning on page vii, the guidelines in "Handling
2. Turn off the computer and all attached devices (see "Turning off the computer"
3. Follow the instructions that come with the option to prepare it for installation and
64
IntelliStation Z Pro Type 6223: User's Guide
components are installed and seated correctly and that you have cleared all
work tools from inside the computer.
the lip on the bottom of the cover rests inside the ledge on the bottom of the
chassis before rotating the cover toward the computer. Press down and forward
on the cover until it locks.
static-sensitive devices" on page 33, and the documentation that comes with
your options.
on page 19).
to connect it to the computer.