Configurations Menu; Talkback Menu; Phones Menu; Control Surfaces Menu - MOTU Traveler-mk3 User Manual

CONFIGURATIONS MENU
A configuration is a "snapshot" of all settings in
CueMix FX (and therefore the Traveler-mk3
hardware itself). The commands in the Configura-
tions menu let you create, save, load, import,
export and otherwise manage as many configura-
tions as you wish.
Here is a summary of Configurations menu
operations:
Configurations
Menu item What it does
Create New Lets you name and save a new configuration,
which appears at the bottom of the Configura-
tions menu.
Save Overwrites the current configuration
(checked in the list at the bottom of the menu)
with the current settings in CueMix FX.
Save To Same as Save above, except that it lets you first
choose the configuration you wish to save to
(instead of the current one).
Delete Lets you choose a configuration to perma-
nently remove from the menu.
Import Loads all configurations from a configuration
file on disk.
Export Saves all current configurations as a file on
disk.
Configuration Choose any configuration to load it. The cur-
list rent (last loaded or saved) configuration has a
check mark next to it.

TALKBACK MENU

Choose the commands in the Talkback menu to
engage or disengage Talkback or Listenback.

PHONES MENU

The Phones menu allows you to choose what you
will hear on the headphone output, just like the
Phones Assign setting in MOTU Audio Setup.
However, this menu provides one extra option that
is exclusive to CueMix FX: Follow Active Mix. This
menu item, when checked, causes the headphone
output to mirror the output of the current mix
being viewed in CueMix FX. For example, if you
104
are currently viewing mix bus 3, the headphones
will mirror the mix bus 3 output (whatever it is
assigned to).

CONTROL SURFACES MENU

CueMix FX can be controlled from an automated
control surface such as the Mackie Control™. Use
the commands in the Control Surfaces menu to
enable and configure this feature.
Application follows control surface
When checked, the Application follows control
surface menu command makes the CueMix FX
window scroll to the channel you are currently
adjusting with the control surface, if the channel is
not visible when you begin adjusting it. The same is
true for the bus tabs: if you adjust a control in a bus
that is not currently being displayed, CueMix FX
will jump to the appropriate tab to display the
control you are adjusting.
Share surfaces with other applications
When the Share surfaces with other applications
menu command is checked, CueMix FX releases
the control surface when you switch to another
application. This allows you to control your other
software with the control surface. Here's a simple
way to understand this mode: the control surface
will always control the front-most application. Just
bring the desired application to the front (make it
the active application), and your control surface
will control it. When you'd like to make changes to
CueMix FX from the control surface, just bring
CueMix FX to the front (make it the active
application).
When this menu item is unchecked, your control
surface will affect CueMix FX all the time, even
when CueMix FX is not the front-most application.
In addition, you will not be able to control other
host audio software with the control surface at any
time (because CueMix FX retains control over it at
C U E M I X F X