Precision Digital Trim And Pad - MOTU Traveler-mk3 User Manual

Traveler-mk3 Front Panel Operation
CHAPTER 6
OVERVIEW
The Traveler-mk3 offers complete front-panel
programming via six rotary encoders and a 2x16
backlit LCD display. All Traveler-mk3 settings can
be accessed via these front-panel controls.
Precision Digital Trim and pad . . . . . . . . . . . . . . . . . . . . . . . 43
Phones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Meters and status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Push-button rotary encoders . . . . . . . . . . . . . . . . . . . . . . . . 46
Multi-function LCD display . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Traveler-mk3 SETUP menu. . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Audio menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
CueMix menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Inputs menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Outputs menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Mixes menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Reverb menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Stand-alone operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 6-1: The Traveler-mk3 front panel mic/guitar input controls.

PRECISION DIGITAL TRIM AND PAD

Turn the Precision Digital Trim™ detented rotary
encoders on the Traveler-mk3 front panel
(Figure 6-1) to adjust the input level of their
corresponding mic/guitar input on the rear panel.
The LCD provides visual feedback as you turn the
knob (Figure 6-2). Each detent adjusts the gain by
approximately 1 dB. The gain range is from zero
(0) to +53 dB. This is digitally controlled analog
trim.
Figure 6-2: the LCD provides feedback when you adjust the Precision
Digital Trim and pad for the four mic/guitar inputs.
Pad switch
Push the rotary encoder once to view the current
gain and pad settings as shown in Figure 6-2
without changing them. Push it again (while the
43