Devices Menu; Configurations Menu - MOTU V4HD User Manual

Copying & pasting (duplicating) entire mixes
To copy and paste the settings from one mix to
another:
1 Select the source mix (Figure 9-1) and choose
Copy from the Edit menu (or press command-C).
2 Choose the destination mix and choose Paste
from the Edit menu (or press command-V).
Clear Peaks
Choose Clear Peaks from the Edit menu to clear all
peak indicators in all CueMix FX meters.

DEVICES MENU

If you are working with more than one MOTU
audio interface product, this menu displays all
interfaces that are currently on line. Choose any
device from the menu to edit its settings using the
CueMix FX software.
CONFIGURATIONS MENU
A configuration is just like a hardware preset (a
"snapshot" of all settings in CueMix FX and
therefore the V4HD hardware itself), except that it
can be created and managed using the CueMix FX
software on your computer, completely
independently of the V4HD hardware. The
commands in the Configurations menu let you
create, save, load, import, export and otherwise
manage as many configurations as you wish.
84
Here is a summary of Configurations menu
operations:
Configurations
Menu item What it does
Create New Lets you name and save a new configuration,
which appears at the bottom of the Configura-
tions menu.
Save Overwrites the current configuration
(checked in the list at the bottom of the menu)
with the current settings in CueMix FX.
Save To Same as Save above, except that it lets you first
choose the configuration you wish to save to
(instead of the current one).
Delete Lets you choose a configuration to perma-
nently remove from the menu.
Import Loads all configurations from a configuration
file on disk.
Export Saves all current configurations as a file on
disk.
Configuration Choose any configuration to load it. The cur-
list rent (last loaded or saved) configuration has a
check mark next to it.
Modifying a configuration
The name of the current configuration is displayed
in the CueMix FX window title bar. If you make any
changes to the settings in CueMix FX, an asterisk
appears in front of the name to remind you that the
current state of CueMix FX doesn't match the saved
configuration. If you wish to update the saved
configuration with the new changes, use the Save
command. To save the current state of CueMix FX
to another configuration, use Save To. To save as a
new, separate configuration, use Create New.
Saving a CueMix FX configuration as a
hardware preset
To save a CueMix FX configuration as a hardware
preset:
1 Choose the configuration from the
Configurations menu to make it the current active
configuration.
2 Choose File menu> Save Hardware Preset.
C U E M I X F X