Digital Performer - MOTU Traveler-mk3 User Manual

Digital Performer

CHAPTER 7
OVERVIEW
This chapter provides a brief overview of Digital
Performer's basic I/O and synchronization
operation with the Traveler-mk3 hardware.
Installing the Traveler-mk3 Mac OS X drivers . . . . . . . . 55
The Traveler-mk3 settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Working with Traveler-mk3 inputs and outputs . . . . . 57
24-bit operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
MIDI I/O via the Traveler-mk3 MIDI ports . . . . . . . . . . . . 57
Processing live inputs with DP plug-ins . . . . . . . . . . . . . . 57
Working with CueMix FX mixing and effects. . . . . . . . . 57
Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Exchanging projects with AudioDesk. . . . . . . . . . . . . . . . 58
INSTALLING THE TRAVELER-MK3 MAC OS X
DRIVERS
As described in chapter 4, "Installing the
Traveler-mk3 Mac Software" (page 33), the Digital
Performer and MOTU Traveler-mk3 software
installers will properly install and update
everything for you.
THE TRAVELER-MK3 SETTINGS
Choose the Traveler-mk3 as your audio input
output device by choosing Configure Audio
System> Configure Hardware Driver from the Setup
menu. This window shows some of the
Traveler-mk3 settings, such as sample rate and
clock source, but to access all of the Traveler-mk3
settings, open MOTU Audio Setup, as shown in
Figure 5-2 on page 38.
Figure 7-1: Choose Setup menu> Configure Audio System> Configure
Hardware Driver to open the dialog shown above and access the
Traveler-mk3 CoreAudio driver. To access the rest of the Traveler-mk3
settings, open MOTU Audio Setup.
For complete details about the Traveler-mk3
settings, see chapter 5, "MOTU Audio Setup"
(page 37). The following sections provide a brief
explanation of each Traveler-mk3 setting for use
with Digital Performer.
55