Packing List And Mac System Requirements - MOTU Traveler-mk3 User Manual

Packing List and
CHAPTER 2
Mac System Requirements
PACKING LIST
The Traveler-mk3 ships with the items listed below.
If any of these items are not present in your
Traveler-mk3 box when you first open it, please
immediately contact your dealer or MOTU.
One Traveler-mk3 I/O rack unit
■
One set of removable rack ears
■
One 6-pin to 6-pin IEEE 1394 "FireWire" cable
■
One DC power adapter
■
One Traveler-mk3 Mac/Windows manual
■
One cross-platform Universal Audio Installer CD
■
One Mac OS X AudioDesk installer CD with
■
PDF manual
Traveler-mk3 product registration card
■
MAC SYSTEM REQUIREMENTS
The Traveler-mk3 system requires the following
Mac system:
A G4/500Mhz Power Mac or faster equipped
■
with at least one FireWire port
At least 256 MB (megabytes) of RAM (512 MB
■
or more is recommended)
Mac OS X (version 10.4.9 or later)
■
A large hard drive (preferably at least 100 GB)
■
PLEASE REGISTER TODAY!
Please register your Traveler-mk3 today. There are
two ways to register.
Visit www.motu.com to register online
■
OR
Fill out and mail the included product
■
registration card
As a registered user, you will be eligible to receive
technical support and announcements about
product enhancements as soon as they become
available. Only registered users receive these
special update notices, so please register today.
Be sure to do the same for the included AudioDesk
software, which must be registered separately. You
can do so online at motu.com/register. Please be
sure to register AudioDesk as well, so that you will
be eligible to receive technical support and
announcements about AudioDesk software
enhancements as soon as they become available.
Thank you for taking the time to register your new
MOTU products!
15