MOTU Traveler-mk3 User Manual page 45

Digital input and output (AES/EBU + S/PDIF)
■
Optical bank A input and output
■
Optical Bank B input and output
■
Optical Bank A and B inputs
■
Optical Bank A and B outputs
■
The digital I/O bank
In the digital input/output bank meter display
(Figure 6-5), the first pair of channels represents
AES/EBU and the second pair represents S/PDIF,
as shown below:
Figure 6-5: Viewing AES/EBU and S/PDIF level meters in the LCD.
Long throw metering for individual channels
To view long-throw horizontal metering for one
channel (or channel pair) at a time in the LCD,
push the METERS knob repeatedly until you see a
horizontal meter display similar to Figure 6-4
below:
Figure 6-6: Horizontal long-throw metering for an individual channel
in the LCD.
T R A V E L E R - M K 3 F R O N T P A N E L O P E R A T I O N
S/PDIF
AES/EBU
Choosing a channel
Turn the METERS knob to cycle among all active
channels or channel pairs. Stereo pairs show two
meters together.
Mic input metering with V-Limit
If you view a mic input, there is an extra meter in
the top row of the LCD that displays V-Limit
compression. This meter shows the amount of
compression applied to the raw input signal when
it exceeds zero dB.
Figure 6-7: Metering for a mic input with V-Limit engaged.
For complete details about V-Limit, see "Overload
protection (mic/guitar inputs only)" on page 87.
When viewing individual channels, banks are
identified as follows:
Symbol
AN
AES
SP
ADA or ADB
TLA or TLB
Bank
Analog
AES/EBU
S/PDIF
ADAT A or B
TOSLink A or TOSLink B
45