MOTU Traveler-mk3 User Manual page 50

channel strip in CueMix FX (Figure 11-3 on
page 82), as well as the settings in the Channel tab
(Figure 11-8 on page 86).
Turn the PARAMETER knob to scroll through
individual parameters, such as the frequency for
the current band of EQ. This is roughly equivalent
to the parameters in the EQ tab (Figure 11-10 on
page 88), Dynamics tab (Figure 11-26 on page 96)
and Reverb tab (Figure 11-28 on page 99) in the
CueMix FX software.
Adjusting the value of a parameter
Turn the VALUE knob to adjust the value of the
current PARAMETER. Some parameters have
default values. If so, push the VALUE knob to cycle
through them.
Inactive items
If a menu item is inactive for some reason (perhaps
it doesn't currently apply or it is disabled), it is
displayed in parentheses.
Copying and pasting
EQ, dynamics and Mix Assign settings allow you to
copy and paste settings between EQ bands and/or
channels. Push the VALUE knob to copy, scroll to
the other item and then push again to paste.
Summary of Inputs menu settings
For a summary of Inputs menu settings, see
"Inputs menu" on page 52.
The OUT (Outputs) menu
Push the CHANNEL button repeatedly until you
see "O:" in the channel section of the LCD
(Figure 6-13). This is similar to accessing the
Outputs tab in CueMix FX console ("The Outputs
tab" on page 84).
50
" O: " Indicates The current
the OUT channel.
(outputs) menu.
"Pages" are groups of
channel settings, such
as one band of EQ.
Figure 6-13: The OUT (outputs) menu.
Choosing a channel
Once you see the Outputs menu (Figure 6-13) in
the LCD, turn the CHANNEL knob to select the
desired output that you wish to edit. This is roughly
equivalent to specifying an output channel strip to
work with in the Outputs tab in CueMix FX
software (Figure 11-6 on page 85).
Working with outputs in the LCD
Once you've selected an output channel, you can
access the various settings for that channel using
the PAGE knob and PARAMETER knobs. The
knobs function the same as described for inputs in
"Choosing a setting to modify" on page 49 and
"Adjusting the value of a parameter" on page 50.
Summary of Output menu settings
For a summary of Inputs menu settings, see
"Outputs menu" on page 52.
T R A V E L E R - M K 3 F R O N T P A N E L O P E R A T I O N
Access individual parameters
here, such as the frequency
setting for a band of EQ.
Change the value of the
current parameter here.