Electrical Connection; Wiring Diagram - Bertazzoni X365GGVX Installation, Use & Care Manual

WARNING!

ELECTRICAL CONNECTION

ELECTRICAL SHOCK HAZARD
This unit is manufactured for a polarized,
Disconnect electrical power at the circuit
grounded 120 volt/60 Hz, 16 amp system.
breaker box or fuse box before installing the
Electric power consumption is about 150 W.
appliance.
The minimum of 102 VAC is required for proper
Provide appropriate ground for the appliance.
operation of gas ignition systems.
Use copper conductors only.
The circuit must be grounded and properly
Failure to follow these instructions could result
polarized.
in serious injury or death
The unit is equipped witth a SJT power cord. In
case of replacement, the power cord shall be
replaced with one of the same type, size and
CAUTION
length.
Label all wires prior to disconnecting when
servicing controls. Wiring errors can cause
ELECTRICAL GROUNDING
improper and dangerous operation.
This appliance is equipped with a three‐prong
Verify proper operation after servicing.
plug for your protection against shock hazard and
should be plugged directly into a properly
grounded socket. Do not cut or remove the
grounding prong from this plug.

WIRING DIAGRAM

12