Electrical Connection - Bertazzoni Professional Series Installation, User And Maintenance Manual

ELECTRICAL CONNECTION

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect electrical power at the
circuit breaker box or fuse box before
installing the appliance.
Provide appropriate ground for the
appliance. Use copper conductors only.
Failure to follow these instructions
could result in serious injury or death.
This unit is manufactured for a polarized, grounded
120 volt/60 Hz, 16
consumption is about 2.5A. The minimum of 102 VAC is
required for proper operation of gas ignition systems. The
circuit must be grounded and properly polarized.
The unit is equipped with a SJT power cord and a
NEMA 5-15P plug. In case of replacement, the power cord
shall be replaced with one of the same type, size and
length.
WARNING
This appliance is equipped with a three-
prong plug for your protection against
shock hazard and should be plugged
directly into a properly grounded socket. Do
not cut or remove the grounding prong from
this plug.
CAUTION
Label all wires prior to disconnecting
when servicing controls. Wiring errors
can cause improper and dangerous
operation. Verify proper operation after
servicing.
amp system. Electric power
15