How To Install The Fax (Fax Model) - Olivetti ANY_WAY User Manual

HOW TO INSTALL THE FAX (FAX MODEL)

After connecting the telephone cord and the power cord, press the ON button of the printer; a self-test
cycle is run and on completion a message indicating that the printer is ready for use as Fax is shown on
the display. If a list of available languages is shown in sequence on the display, use the numeric keypad
to select the language desired. The same procedure must then be carried out for selection of the
nationality, current date and time and any other settings that vary according to nationality and the
country selected.
Installation
1 If the printer has not been preconfigured, at power-on all the languages available are shown in
sequence on the display.
2 When the languages available are shown in sequence on the display with 2 digits "nn" which identify
these, press the keys referring to the number "nn" which matches the language desired.
3 Confirm selection pressing the
country.
note: If you press the
Each country shown on the display is identified by a number "nn" with which it is associated.
4 Press the keys of the "nn" number corresponding to the destination country desired.
5 Confirm your selection pressing the
data and time.
note: If you press the
6 Use the fax control panel and enter the date and time from the numeric keypad.
Set the date confirming this with the Start Fax button.
Set the time confirming this with the Start Fax button.
7 On completion, confirmation of the data entered is requested with the possibility of confirming with
the key or o canceling with the
8 Press the
note: Pressing the
point 6.
9 Enter your phone number and then confirm with the Start Fax button.
note: Pressing the
previous status for entry of the telephone number (return to point 9).
10 Press the
In certain countries, further settings are necessary; in these cases, continue installation.
11 After the phone number has been confirmed, a prompt to set recognition of the rhythm of the rings is
shown on the display. Press the 1 key to access the setting procedure.
Pressing of the
22 CHAPTER 1
key; the display shows possible selections for the destination
key, you will return to point 2.
key, you will return to point 4.
key; the request to enter the phone number of the sender is shown on the display.
key, it is possible to return to setting of the current date and time return to
key, it is possible to cancel the digits entered. Pressing the
key, the printer switches to stand-by mode and is ready for use.
key returns to stand-by mode and the printer is ready for use.
key; the display shows setting information of the current
key.
key restores