How To Improve Print Quality Of The Photos; Printing Of Photos From Memory Card Or Camera; Printing Photos From Your Pictbridge Digital Camera - Olivetti ANY_WAY User Manual

HOW TO IMPROVE PRINT QUALITY OF THE PHOTOS

Photo print quality can be improved using the "Magic" button.
1 Press the "Magic" button: the printer analyzes the images and makes the necessary corrections.
note: The results of these operations are not shown on the LCD so as not to alter the original photo:
the result is visible only during printing.
2 Press the "Print" button to print the photos modified; hold down the "Magic" button selected.

PRINTING OF PHOTOS FROM MEMORY CARD OR CAMERA

To obtain the best results when printing photos, it is advisable to install the color cartridge and the
photo cartridge and to use photographic paper. See "Replacement of the black ink and photographic
cartridges using the garage".
1 Insert the memory card that you wish to print from into its related connector on the printer.
2 A screen indicating the total number of compatible photos stored on the memory card is displayed on
the control panel LCD. If needed, press the Change View button to toggle between full-screen and
thumbnail screen views. See "Viewing Photos on Your Printer's Display". An icon on the bottom left-
hand side of the screen's icon bar will indicate the device connected.
3 Using the right, left, up and down navigation buttons, scroll the photos until the frame highlighted is
positioned on the photo to be printed and then select it.
4 Select the number of copies of the photo selected to be printed pressing the (+) or (-) button until the
number desired is shown to the bottom right of the photo. The total number of images that will be
printed is shown in the bottom right corner of the icon bar.
5 Select the layout in which you wish to print the selected photos by pressing the Page Layout button the
number of times needed to select the required layout. You have the following possibilities:
– Print 1 borderless photo fitted on the page size
– Print 1 photo with borders and fitted on the page size
– Print 2 borderless photos fitted on the page size
– Print 4 borderless photos fitted on the page size.
6 Clicking on the icon that indicates the total number of photos saved, it is also possible to print the
index of all the photos selecting the "All the Photos" layout.
7 Press the Print button to print the photos selected. The illuminated icons switch off, the photo
processing screen page is shown on the LCD. At the end of the printing process, the screen page that
indicates the total number of photos saved will be redisplayed.

PRINTING PHOTOS FROM YOUR PICTBRIDGE DIGITAL CAMERA

To obtain the best results when printing photos, it is advisable to install the color cartridge and the
photo cartridge and to use photographic paper. See "Replacement of the black ink and photographic
cartridges using the garage".
1 Make sure your PictBridge digital camera is turned on and connected to the printer. For more
information, see "Connecting a Digital Camera to Your Printer".
2 Printing is managed directly by your camera, so read your camera's User's Guide for instructions on how
to print your photos.
During printing, the Print button will flash to indicate that a print job is under way.
note: If the size of the paper loaded in the printer is different than the paper size selected from the
digital camera for printing and you begin to print, the printed output will be wrong.
28 CHAPTER 2