Activation In Bluetooth Mode (Wireless Model) - Olivetti ANY_WAY User Manual

ACTIVATION IN BLUETOOTH MODE (WIRELESS MODEL)

The wireless model permits direct printing of images captured using a mobile phone via Bluetooth
wireless connectivity.
To verify whether the Bluetooth capability is available, check that the blue led of the Bluetooth icon is ON.
If the blue led of the Bluetooth icon is OFF, proceed as follows:
• In the Windows environment:
1 Carry out USB installation as described in the documentation "Setting up your printer".
note: If installation has already been performed, it is not necessary to repeat it.
2 Open the Toolbox program (Start > Olivetti > Programs > Toolbox).
note: The USB cable must be connected and the printer must be ON.
3 Click on the "Settings" button and then on "Bluetooth Settings" to access configuration of
Bluetooth parameters.
4 Enable Bluetooth mode and click on "Send settings": wait for automatic reception of the data of the
Bluetooth network present: the blue light on the printer lights up.
Close the "Toolbox" program.
5 The printer is not able to operate in the Bluetooth environment.
If a password is requested in the connection phase, enter "0000" (or other if set by the user).
• In the Mac OS X environment:
1 Carry out USB installation as described in the documentation "Setting up your printer".
note: If installation has already been performed, it is not necessary to repeat it.
2 Run the Toolbox program from the desktop.
note: The USB cable must be connected and the printer must be ON.
3 Click on the "Settings" button and then on "Bluetooth Settings" to access configuration of
Bluetooth parameters.
4 Click on "Bluetooth Status". Activate Bluetooth mode and wait for automatic reception of the data
of the Bluetooth network present: press "Apply".
Close the "Toolbox" program.
5 The printer is not able to operate in the Bluetooth environment. If a password is requested in the
connection phase, enter "0000" (or other if set by the user).
16 CHAPTER 1