Fax Messages; Messages During Transmission; Error Messages During Reception - Olivetti ANY_WAY User Manual

Problem
The PictBridge USB LED on the
front panel is flashing.
The USB LED on the front panel
does not come on even though a
USB device is connected to the
printer.

FAX MESSAGES

The display of the control panel of the fax, which usually shows the date and time, informs the user of
the status of the current activity of the fax. The messages displayed do not prevent normal operation of
the printer and can remain on the display until the next time the fax module is used.
To clear the message displayed, press the Stop ("C") key on the control panel of the fax.

Messages during transmission

Message
TX INTERRUPTED
TX NOT POSSIBLE
TX MEMORY FULL
TX ERROR

Error messages during reception

Message
RX INTERRUPTED
RX ERROR
MEMORY FULL
68 CHAPTER 5
Possible Cause
• A paper jam has occurred.
• Your printer is receiving data
from the digital camera
connected.
• The USB device connected to
the USB connector on the
front panel is not recognised
by the printer.
Description
• The user has interrupted the current transmission pressing the STOP
button.
• The scanner is already occupied in other operations, for example from
the computer. Wait for completion of the operation in course on the
scanner to acquire a new document to be faxed.
• The memory available on the fax is full because too many documents
have been acquired by the scanner; no more documents can be
saved.Fax the documents in the memory or cancel these.
• Is displayed at the end of a fax transmission that failed. Try to fax
another document.
Description
• The user has interrupted reception in course pressing the STOP button.
• Is displayed at the end of a fax reception that has failed. Try to receive a
new document via fax.
• The memory available on the fax is full because many documents have
been received. If this type of error occurs, a generic error code is
indicated in the fax reportIt is advisable to print the documents received
present in the memory or cancel these if not desired.
Corrective Action
• Clear the paper jam. For
information see "Clearing
Paper Jams".
• This is indication that the
data is being transferred
correctly.
No action is required.
• Connect a USB device that
complies with the printer's
requirements for the
connection of USB devices.