Image 10-2
*
Video may be Composite video/ S-Video / SDI
•
dark arrow : fade in/out effect possible
•
dotted arrow : undetermined case, fade in/out effect may take place or not
•
striked out arrow : fade effect impossible
The switching effects are only possible in the full screen mode
10.3 Background
Purpose
If there is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the background
settings.
How to change the background ?
1. Press MENU to activate the Tool bar.
2. Press → to select the Signal item. (image 10-3)
3. Press ↓ to pull down the Signal menu.
4. Use ↑ or ↓ to select Background.
5. Press → to pull down the menu.
R5976697 CINEVERSUM™ 110 06012004
10. Signal menu
85