3Orientation; 4Language - Barco CineVERSUM 110 R9010120 Owner's Manual

13.8.3 Orientation
Projector orientations
Depending on how the projector is oriented, the projector's internal settings have to be adapted. See also Chapter "Installation",
"Orientation".
How to change the orientation ?
1. Press MENU to activate the menu bar.
2. Press → to select the Installation item. (image 13-23)
3. Press ↓ to pull down the Installation menu.
4. Use ↑ or ↓ to select Orientation.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select the desired orientation.
7. Press ENTER to confirm.
The projection is adapted and a white bullet shows the active configuration.
Image 13-23
13.8.4 Language
List of languages
The list of selectable languages depends on the software of the projector.
Standard available languages:
• English
• French
• German
• Spanish
How to change the Language ?
1. Press MENU to activate the menu bar.
2. Press → to select the Installation item. (image 13-24)
3. Press ↓ to pull down the Installation menu.
4. Use ↑ or ↓ to select Language.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select the desired language.
7. Press ENTER to confirm.
The language is adapted and a white bullet shows the active configuration.
R5976697 CINEVERSUM™ 110 06012004
13. Display Setup
107