Using The Dialog Boxes - Barco CineVERSUM 110 R9010120 Owner's Manual

5. Getting used with the Menu structure
How to exit the submenu ?
1. Press BACK to exit a submenu.
Press MENU to exit the menu

5.3 Using the Dialog boxes

How to use the dialog boxes ?
Some parameters are modified by means of a dialog box, where selections can be made and/or values can be entered.
The values can be entered in several ways:
Entering numeric values using the numeric keys on the remote control
1. Press ENTER to activate the input field. (image 5-2)
2. Key in the desired value.
Projector addresses
Projector address
Common RC5 address
Image 5-2
Entering numeric values using the arrow keys on the remote control
1. Press ENTER to activate the input field.
2. Press ← or → to select the digit to be changed. (image 5-3)
3. Press ↓ or ↑ to increase or decrease the value.
Projector addresses
Projector address
Common RC5 address
Image 5-3
Entering numeric values using the arrow keys on the local keypad
1. Press ENTER to activate the input field.
2. Press ← or → to select the digit to be changed.
3. Press ↓ or ↑ to increase or decrease the value.
To confirm the changes always press ENTER.
Use ↓ or ↑ to browse between the different fields.
In some cases an alphanumeric value (file name, ...) has to be entered. Use ↑ or ↓ to scroll through the char-
acter values once the input field is activated.
Following characters can be browsed in this particular order:
Decimal scroll list: 0123456789
Signed decimal scroll list: 0123456789-
ASCII scrolllist:ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789+-*/&@#.;.abcdefghijklmnopqrstuvwxyz
42
5
1
005
1
R5976697 CINEVERSUM™ 110 06012004