Table of Contents
Advertisement
Image 11-4
When switching from the dual mode to the single mode the lamp with the longest runtime is switched off.
If the runtimes are equal (if the projector has always been operated in dual mode) then lamp 1 is switched out.
When switching to single mode, returning to the dual mode will not be possible in the first 60 seconds, Dual
in the menu is greyed out and LED3 is flickering, thereby preventing hot restrike which may damage the lamp.
11.4 Economic ON/OFF
What can be done?
The lamp power can be reduced to save the lamp. When using the reduced lamp power, the lifetime will be adapted accordingly.
How to switch to an economic mode ?
1. Press MENU to activate the menu bar.
2. Press → to select the Lamps item. (image 11-5)
3. Press ↓ to pull down the Lamps menu.
4. Use ↑ or ↓ to select Economic.
5. Press → to select the On or Off item.
On
Economic mode is switched on
Off
Economic mode is switched off
6. Press ENTER to confirm.
Image 11-5
Economic mode is only available when in Dual lamp mode. The ON/OFF items will be greyed out in Single
lamp mode.
11.5 Runtime warning
What can be done ?
When the lamp has reached a certain predetermined runtime, a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
R5976697 CINEVERSUM™ 110 06012004
11. Lamps Menu
89
Advertisement
Table of Contents
