Table of Contents
Advertisement
4. Use the arrow keys to select the Extended check box.
5. Press ENTER to disable or enable the extended mode.
Check Extended to switch to extended mode.
Uncheck Extended to switch to standard mode.
Image 6-5
How to select an input on the Video Selector
1. Use ← or → to browse through the different inputs.
2. Press ENTER to select.
Use MENU or BACK to exit the Video Selector.
Graphical interface
A
B
C
D
E
Image 6-6
A BNC or S-Video connector on the video selector can be in one of following conditions:
•
A: connector disabled
•
B: connector enabled but inactive (no video signal present on connector)
•
C: connector enabled & active (video signal present on connector)
•
D: connector enabled active & selected
•
E: connector enabled & active & focused (browser positioned on connector)
A source can also be selected via the dedicated key 9 on the RCU. Key 9 allows to browse through the active
inputs.
R5976697 CINEVERSUM™ 110 06012004
A
B
C
D
E
6. Source Selection
47
Advertisement
Table of Contents
