Rs232 In Connection - Barco CineVERSUM 110 R9010120 Owner's Manual

3. Connections
R/PR
G/Y B/PB
DVI
Image 3-12
How to select the SDI input
1. Press 7 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu.

3.9 RS232 IN connection

What can be connected to the RS232 IN connection ?
The RS232 IN connection allows the projector to communicate with a computer e.g. IBM PC or Apple Macintosh.
R/PR
G/Y B/PB
DVI
Image 3-13
RS232 indication
Applications of the RS232 connection
Remote control:
• easy adjustment of projector via IBM PC (or compatible) or MAC connection.
• address range from 0 to 255.
• allow storage of multiple projector configurations and set ups.
• wide range of control possibilities.
Data communication: sending data to the projector or copying the data from the projector to the computer.
To set up the baud rate of the projector, see chapter "13. Display Setup", "RS232 baudrate", page 109.
24
Hs/Cs Vs VIDEO
ANALOG RGB RS 232 C
SDI
IN
Hs/Cs Vs VIDEO
ANALOG RGB RS 232 C
SDI
IN
S-VIDEO
R.C.
SDI
OUT
S-VIDEO
R.C.
SDI
OUT
R5976697 CINEVERSUM™ 110 06012004