Table of Contents
Advertisement
6. Source Selection
How to select a source ?
1. Press MENU to activate the menu bar.
2. Press ↓ to pull down the Source Selection menu.
3. Use ↑ or ↓ to select one of the different sources (Press → to pull down if the item has a submenu).
4. Press ENTER to confirm your choice.
On the screen appears now the selected source with at the same time for a few seconds a text box with source information.
(image 6-1)
Video source 1
Video
Video625.c06
Image 6-1
Source indication
6.4 Selecting a data source on the 5-cable input
What can be connected to the 5-cable input
The following source can be connected to the 5-cable input in normal mode:
•
Data on BNC's
•
Component Video
•
RG(s)B
The position of the icon "1" will always indicate which BNC configuration is selected.
How to set the correct source
1. Press MENU to activate the menu bar.
2. Press ↓ to pull down the Source Selection menu.
3. Use ↑ or ↓ to select one of the 3 possible sources. (image 6-2)
When to select :
DATA on BNC's
Component Video
RG(s)B Video
Image 6-2
44
When a data signal is connected to the BNC's
When a video signal of the type (PR/Y/PB) is connected on the BNC's
When RGB video signal with Sync on green or sync on H is connected on the BNC's.
This signal is routed to the video circuit and is projected in a Video Window.
R5976697 CINEVERSUM™ 110 06012004
Advertisement
Table of Contents
