13. Display Setup
13.8 Installation menu
Overview
•
Lens adjustments
•
Projector address
•
Orientation
•
Language
•
Quick access keys
•
RS232 baudrate
•
Automatic startup
•
Security
13.8.1 Lens adjustments
What can be done ?
Motorized lenses can be adjusted in the installation menu or via the dedicated keys on the remote (see chapter "Getting Started",
"Quick lens adjustment").
The following parameters can be adjusted:
•
Zoom
•
Focus
•
Shift (also for non motorized lenses)
How to Zoom/focus or shift ?
1. Press MENU to activate the menu bar.
2. Press → to select the Installation. (image 13-14)
3. Press ↓ to pull down the Installation menu.
4. Use ↑ or ↓ to select Lens adjustment.
5. Press ENTER to start zoom/focus adjustment.
A text box appears on the screen. (image 13-15)
↑ or ↓
← or →
ENTER
Logo
6. Press ENTER to switch to the shift mode.
See image 13-16.
← or →
↑ or ↓
ENTER
Logo
104
Lens zoom
Lens focus
to switch the cursor key between zoom/focus and vertical/horizontal shift.
to switch the image between active source or test pattern
Horizontal shift
Vertical shift
to switch the cursor key between vertical/horizontal shift and zoom/focus
to switch the image between active source or test pattern
R5976697 CINEVERSUM™ 110 06012004