Table of Contents
Advertisement
12. Image Files Menu
6. Use ↑ or ↓ to select the desired file.
Tip:
For more info about the available image files and the specifications, see Chapter Standard Image Files.
7. Press ENTER to confirm.
The file will be loaded and the image is adapted accordingly.
Image 12-1
Load file
Video625.c01
Video625.c02
Video625.s00
Image 12-2
load file dialogbox in case of a video source
In PiP mode, the files which may be loaded will be of the data type if the active window is a data window, or
they will be of the video type if the active window is a video window.
What to do if the image is not perfect ?
If the displayed image is not correct after AutoImage or after selecting the best fitting file, go to the Edit menu, select the active file
and change the settings.
12.4 Edit file
Overview
•
Editing a file
•
Correct file parameters
•
Advanced video settings
•
Advanced Data settings
12.4.1 Editing a file
What can be done with the Edit file menu ?
The Edit file menu makes it possible to adapt the settings of the file according to the real settings of the connected source. Consult
the source specifications before entering the data.
How to edit a file ?
1. Press MENU to activate the menu bar.
2. Press → to select the Image files item. (image 12-3)
3. Press ↓ to pull down the Image files menu.
92
R5976697 CINEVERSUM™ 110 06012004
Advertisement
Table of Contents
