Table of Contents
Advertisement
Image 13-29
Security
Activating the security mode involves
the following things:
- The startup screen (identification window)
will contain a line withthe name of the
owner in it.
- You will be asked to enter a PIN code
every time the projector lost its power.
Are you sure you want to activate the
"Security mode"
YES
Image 13-30
Message
The security mode has been
activated.
Don't forget your PIN code!
Image 13-33
How to disable the security mode ?
1. Press MENU to activate the menu bar.
2. Press → to select the installation item. (image 13-34)
3. Press ↓ to pull down the menu.
4. Use ↑ or ↓ to select Security.
5. Press → to open the menu.
6. Use ↑ or ↓ to select OFF
7. Press ENTER to confirm
An Enter PIN code dialog box will be displayed.
8. Enter your PIN code.
When the PIN code is correct the security mode will be switched off.
R5976697 CINEVERSUM™ 110 06012004
Security
Enter name of owner
e.g. Barco Educational Center
Image processing department
Brussels - Belgium
NO
Image 13-31
CANCEL
ACCEPT
13. Display Setup
Security
Enter your PIN:
Confirm your PIN code:
Image 13-32
111
Advertisement
Table of Contents
