Avaya PARTNER Advanced Communications System Quick Reference Manual page 109

Centralized Telephone Programming Flow Chart—How to Use
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
• To Enter Programming Mode :
f 0 0
— Press
s s c
— Press
— Dial the extension number to be programmed. Buttons on to which lines or pools are assigned light up to show the current Line Ringing
setting: remaining buttons can be programmed with Auto Dial number or features
• To Program Another Feature at the Same Extension:
— After you program one feature, continue with the instructions in the box for the next feature
• To Change Setting for Another Extension
c
— Press
— Dial the new extension's number
• To Erase a Feature or Auto Dial Button:
— Press the programmed button
!
— Press
• To End Programming Mode:
f 0 0
— Press
109
Icon Description
= Factory setting
= Button with lights required
= Button with lights recommended