Save These Instructions - Lucent Technologies PARTNER Advanced Communications System Installation Manual

Releases 1.0, 1.1, 2.0 or later
Hide thumbs Also See for PARTNER Advanced Communications System:
Table of Contents

Advertisement

Additional Safety Instructions for
Installation Personnel
1. DO NOT install telephone wiring during a lightning storm.
2. DO NOT install telephone jacks in a wet location unless the jack is specifically designed for wet
locations.
3. Never touch uninsulated telephone wires or terminals, unless the telephone line has been
disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
5. The control unit must be securely wall mounted.
6. supply cord to building surfaces.
!
CAUTION:
If any wiring from the extension jacks leaves the building premises, you must install
Lucent Technologies™ IROB protectors (see "Requirements for Out-of-Building
Extensions" on page 36.)
!
CAUTION:
Use only Lucent Technologies-manufactured PARTNER modules in the PARTNER
Advanced Communications System.
!
CAUTION:
Environmental and electrical conditions must meet the requirements as listed on
page 36.

SAVE THESE INSTRUCTIONS

Advertisement

Table of Contents
loading

Table of Contents