Enabling Touch-Tone - AT&T MERLIN Plus Training Manual

ENABLING TOUCH-TONE

Although your MERLIN Plus system uses phones with Touch-Tone dial pads, your
company may have rotary phone lines. You can change to Touch-Tone service in
the middle of a call if you need to access computer services that require tone
signals, such as bank-by-phone, credit card authorization, etc.
To program a touch-tone enable button:
Action
1. Label a button "Touch-Tone."
2. Slide the T/P switch to P.
3. Touch the button you Iabelled.
4. Touch * and then 76.
5. Slide the T/P switch to the center.
To use the touch-tone enable feature:
Action
1. Dial the phone number.
2. Touch the Touch-Tone button.
3. Dial the additional numbers
necessary to use the service.
4. When you finish the call, hang up.
64
Result
Touch-Tone
You'll hear a ringing pattern. The
red line lights come on and the
green line lights flash.
The button is programmed.
Result
The system places the call.
These are sent as tone signals.
The call is disconnected. Touch-
Tone service is cancelled.