AT&T MERLIN Plus Training Manual page 15

To change the line ringing (OFF/ON/DELAYED):
Action
1. Slide the T/P switch to P.
2. Touch the button of the phone line
you want to change.
3.
Enter the following codes until the
desired affect appears:
*35–No ring
*36–Delayed ring
*37–Ring
4. Repeat steps 2 and 3 for each line
you want to change.
Slide the T/P switch to the center
5.
position.
Note: If you often change the ringing pattern for your phone, you may want to
program an Override button. For example, if you cover for a co-worker every day at
lunch time, you can set up your phone for delayed or no ring. Whenever you want
the phone to ring, you can touch the Override button and the phone will ring until
you touch Override again. (See page 55 for the procedures to program and use
Ring Override.)
1. If you are the back-up person for an Attendant, change the ringing on all
lines from Off to Delayed while the Attendant is on a coffee break or at
lunch. (Pay attention to the lights next to the line buttons while you do this.)
2. Remember to change the ringing to Off after the Attendant returns.
Result
You'll hear the ringing pattern. the
red line light(s) come on and the
green line light(s) flash.
The red light may come on, flash,
or be off.
No ring–light off
Delayed ring–light on
Ring–light flashing
The line lights go off.
NOW YOU TRY IT!
Ringing Changes
9