AT&T MERLIN Plus Training Manual page 72

To program an auto answer-Intercom button:
Action
1. Label a lighted button
"Auto Answer-lnt".
2. Slide the T/P switch to P.
3. Touch the button you Iabelled.
4. Touch * and then 70.
5. Slide the T/P switch to the center
position.
To use the auto answer feature:
Touch the Auto Answer-lnt
button.
To cancel auto answer:
Touch the Auto Answer-lnt
button.
Note: You can program both an Auto Answer-Intercom button and an Auto
Answer-All button, but you can use only one at a time.
66
Result
Auto Answer-
Int
You'll hear a ringing pattern. The
red line light(s) come on and the
green line light(s) flash.
The button is programmed.
The green light next to Auto
Answer-lnt comes on.
The green light next to Auto
Answer goes off.