AT&T MERLIN LEGEND Data Manual page 96

System Programming
Ringing Options
Description
Factory Setting
Considerations
Planning Forms
Entering Programming
Exiting Without Changes
What you see
System Programing:
Make a selection
System Extensions
SysRenumber Options
O p e r a t o r T a b l e s
LinesTrunks AuxEquip
Exit NightSrvce>
System Programming:
Make a selection
Labeling
Data
Print
Cntr-Prg
Exit
4-28
Programming Instructions
To set lines on data stations so that incoming data calls ring immediately.
Immediate Ring
The data station being programmed must be idle while you program this
option.
Lines on digital data stations should be set to ring immediately since they do
not have audible ringing.
The immediate ring option is the only option recommended for digital data
stations, since they do not have audible ringing.
Data Form 2a, Analog Data Station
Button diagram
Data Form 2b, Digital Data Station
Button diagram
Console: Menu, Sysprog, Exit
PC/SPM: Type SPM, press [any key], F1, F5
To
exit from any screen without making changes, select Exit before saving
your entry or menu selection.
What you do...
1. Display next page of System
Programming menu
2. Select Centralized Programming
C o n s o l e
PC
PgUp
More
F 4
Cntr-Prg