AT&T MERLIN LEGEND Data Manual page 88

System Programming
What You See
Call Restriction:
Enter extension
Backspace
Enter
Exit
Call Restriction:
Enter extension
xxxx
Backspace
Enter
Exit
xxxx = extension number entered in step 3
Extension xxxx:
Select one
Unrestricted
Outward Restrict
Toll Restrict
Next
Exit Enter
Currently programmed choice is
highlighted.
Extension xxxx:
Select one
Unrestricted
Outward Restrict
Toll Restrict
Next
Exit Enter
Your choice is highlighted.
4-20
Programming Instructions
What You Do...
3. Identify data station you want to
program in any one of the following
ways:
Extension no,
Slot and port no.
Logical lD no.
DSS
If you preprogramming more than one
sequentially numbered extension,
enter lowest extension number.
Digits appear on screen as you dial or type. If
you make an error, select Backspace or press
F4 and retype.
4. Save your entry
If you get the Station Busy message, wait for an
idle condition, or exit system programming and
try again later.
5. To remove restrictions
To restrict data station from making
outside calls (local and toll)
To restrict data station from making
toll calls
6. To assign or remove restrictions from
another extension:
If next extension number is
sequential (difference between
extension numbers is 1)
Your previous entry is saved and next
extension number displays on line 1.
Continued
PC
Console
Type:
Dial:
[nnnn] [nnnn]
[sspp]
[sspp]
# [nnn]
# [nnn]
Press DSS
button for
extension no.
F10
Enter
F1
Unrestricted
F2
O u t w a r d
Restrict
F3
Toll
Restrict
F 9
Next
Repeat step 5
Repeat step 5