AT&T MERLIN LEGEND Data Manual page 63

Planning
See System Planning (Key or PBX),
Chapter 4, for instructions on Allowed
List and Disallowed List.
Forced Account Code
Entry
Note: If you assign restrictions to a modem pool, assign the same restriction to
all members of the pool. If these restrictions are too limited, you can use the
Allowed List feature to setup numbers (such as local host computer numbers)
that can be dialed regardless of the restriction on the data station. Or, instead of
restricting the data stations, you can use the Disallowed List feature to set up
numbers that cannot be dialed by any user.
Planning Form Instructions
Use the "Optional Features" section of Data Form 2a or 2b for each data
station to record your decisions. Under the "Call Restriction" heading:
1. If you do not want Call Restrictions, check Unrestricted.
2. If you want the data station restricted from making any outside calls (only
intercom calls can be made), check "Outward Restrict,"
If the data station is a member of a modem pool, be sure to assign the
same restriction to all members of the pool.
3. If you want the data station restricted from making long-distance calls
(intercom and local calls can be made), check "Toll Restrict."
If the data station is a member of a modem pool, be sure to assign the
same restriction to all members of the pool.
The Forced Account Code Entry feature can be used for billing or for tracking
data calls by requiring data station users to enter account codes (1 to 16 digits)
for outside calls. Assign this feature to data stations so that you can associate
outgoing data calls with specific client accounts.
Note: Account codes cannot be used to track incoming calls to data stations.
Planning Form Instructions
Use the "Optional Features" section of Data Form 2a or 2b for each data
station to record your decisions. Under the "Forced Account Code Entry"
heading:
1. If the user must enter an account code for outgoing calls, check "Yes".
2. If you do not want the feature assigned to the data station, check "No".
Assigning Features to Data Stations
3-19