Assigning Features To Data Stations - AT&T MERLIN LEGEND Data Manual

Planning

Assigning Features to Data Stations

Voice Announce, Call
Waiting, and Automatic
Callback
This section describes how to assign features to each digital or analog data
station and to each modem and ISDN 7500B Data Module pair. This includes
analog data stations connected to an MLX telephone using an MFM or digital
data stations that include a telephone and analog and digital data stations (data
stations that do not include a telephone).
Note: Features cannot be independently assigned to analog data stations
connected to analog multiline telephones using a General Purpose Adapter
(GPA). The feature assignment for the telephone also includes the analog data
station; therefore, the following planning instructions are not used for these
types of data stations.
Assign optional features to data stations. The features are
Voice Announce, Call Waiting, and Automatic Callback
Pool Dial-Out Code (Hybrid/PBX systems only)
Call Restrictions
Forced Account Code Entry
Ringing Options
ARS Facility Restriction Level
System Speed Dial
Record your optional features on Data Form 2a, Analog Data Station and
Data Form 2b, Digital Data Station, the reverse of Key or PBX System
Form 4b, Digital/ISDN (MLX) Telephones, and the reverse of Key or PBX
System Form 5b, Direct-Line Console (DLC)—Digital/ISDN.
Notes:
The System Speed Dial feature is programmed system wide for both voice
and data stations, Follow the instructions in System Planning (Key or PBX) to
assign System Speed Dial codes to data station users.
All members of a modem pool should have the same feature assignment.
For each digital or analog data station and each modem and ISDN 7500B Data
Module pair, the following features must be disabled:
Voice Announce
Call Waiting
Automatic Callback
Assigning Features to Data Stations
3-17