AT&T MERLIN LEGEND Data Manual page 122

Making and Receiving Data Calls
Data Status Button
Privacy
See System Reference for more on
Barge-In.
Programming an Auto Answer All Button:
1. Label button to be programmed as Auto Answer All.
2. Slide T/P switch to P.
3. Press labeled Auto Answer All button.
4.
Dial 754.
5. Slide T/P switch to center to end programming.
Use these instructions only if your data station does not include an MLX
telephone. A Data Status button allows you to monitor the activities of your
computer or data terminal. The light next to your Data Status button will goon
when a data call is being made or received from the digital data station
connected to the telephone.
Programming a Data Status Button:
1. Label the button you want to program as Data Status with the extension of
the equipment you want to monitor.
2. Begin programming.
Press Feature.
Dial 00.
Press labeled Data Status button.
Dial 83.
3. Identify the equipment you want to monitor.
Dial extension number.
4. Slide the T/P switch to center.
Press Feature.
Dial 00.
Use these instructions only if your analog data station does not have an analog
multiline telephone connected.
For analog data-only stations and analog data stations connected to an MLX
telephone using an MFM, use the Privacy feature before you make a data call to
prevent unwanted interruptions during transmission. Privacy prevents co-
workers from accidentally connecting to your data call and causing a loss of
data by using the same line or trying to use the Barge-In feature. Co-workers
picking up the line you are using hear a busy signal instead of being connected.
5-13
System Data Features