Basic Administration
Once your system planning arid paperwork are complete, you can perform basic ad-
ministration procedures. The chart below summarizes the procedures described in
this section. Remember that if you are administering a new system that has just been
installed, some of these basic produce may be required to set the proper operating
conditions for your particular environment, and you must perform them first before
you go on to do any other system administration. Carry out the procedures in the
order listed in the chart but keep in mind that you may not need to perform all of them
to customize your system to your particular environment. Read each procedure first
to see if it applies to you.
lMPORTANT: Choose a time when you do not expect many people to be using their
voice terminals.
Perform Basic Administration
Set your control unit.
Specify Touch-Tone or rotary dialing.
Assign lines and call restrictions to voice terminals.
Assign PBX/Centrex extensions to line buttons.
Administer fixed feature buttons.
17