Assigning Pbx/Centrex Extensions To Line Buttons - AT&T MERLIN 3070 Administration Manual

22

ASSIGNING PBX/CENTREX EXTENSIONS TO LINE BUTTONS

(Attendant consoles only)
Line buttons on attendant consoles do double duty. They can be used for placing
or receiving calls, and they can be used like Auto Intercom buttons for quick dialing
of and one-touch transfer to extensions. Before an attendant can use the line but-
tons for quick dialing and transferring you must assign PBX/Centrex extensions to
the line buttons on the console. To assign a PBX/Centrex extension to a line button,
follow the procedure below.
1. If you have not already done so, enter administration mode by following the
boxed instructions on page 16.
2. Label the button with the extension number you are assigning to it.
3. Touch Adm Opt.
The green light beside Adm Tel goes out, and the green light beside Adm
Opt flashes slowly.
4. Dial 1.
The green light besside Adm Opt stops flashing and remains on.
5. Touch the line button.
The green light next to the button comes on.
Dial the PBX/Centrex extension number, six digits or less, that corresponds
6.
to the line selected.
7 Repeat steps 5 and 6 until you have assigned extensions to all your line
buttons.
8. Continue to administer your system, or, if you have no further system ad-
ministration to do, leave administration mode by following the boxed instruc-
tions on page 16.
.