Custom Features - AT&T MERLIN 3070 Administration Manual

Custom Features

Feature*
Auto Intercom
Automatic Line Selection
(See page 30.)
Call Coverage
(See page 25.)
Primary Coverage
Secondary Coverage
Call Restriction
(See page 20.)
Do Not Disturb
Intercom Conference
Intercom Drop
Last Number Redial
Manual Signaling
*
A
means that the administrator assigns the feature.
I
means that the individual can assign the feature.
AI
means that an individual can assign the feature with the administrator's approval.
52
Program buttons on voice terminals for one-touch dialing of frequently called intercom
numbers.
Automatically selects a free line when you lift the handset to make a call. Anyone can pro-
gram a voice terminal to select lines in a specific order.
Allows people to cover calls for others with whom they do not share lines. The system ad-
ministrator must determine who can cover for whom.
Voice terminals may be programmed for either primary or secondary coverage with
immediate, delayed, or no ring.
One person can cover as many as five telephones.
Assigned to someone who screens another person's calls or answers calls when that per-
son is away.
A secretary can answer all calls to a manager's voice terrninal.
Assigned to someone who provides a second backup for a covered voice terminal. Calls
coming in on voice terminals assigned secondary coverage automatically ring after a delay.
A backup secretary can cover calls for a primary attendant who is out to lunch.
Enables administrator to adjust any voice terminal for call restriction if necessary. You can
restrict voice terminals to only intercom or PBX/Centrex extension calls through your
MERLIN system. Assign outward call restrictions through your PBX/Centrex system.
Prevents the voice terminal from ringing whenever you activate this feature. While Do Not
Disturb is in effect, intercom callers get a busy signal and outside and PBX/Centrex calls
ring at attendant consoles and any voice terminals covering for or assigned to that line.
Use this feature if you are busy and do not want to be interrupted.
Allows you to include other people in your conference calls on their intercom lines. In addi-
tion to yourself, you can include up to two people on intercom lines and two people on out-
side lines. If you program a button for intercom Conference, you must also program a but-
ton for intercom Drop.
Allows you to disconnect a line in an intercom Conference if the line is busy, no one answers,
or you want to remove someone from the conference.
Allows you to store the last number you dialed. (If your PBX/Centrex system does not return
a dial tone immediately after dialing an outside line access number this feature may not work
properly)
Use this feature for one-touch redialing of an outside number that is busy or is not
answered.
Program a button so that touching it causes a beep at another voice terminal.
Use the button to signal another person.
Description