AT&T MERLIN 3070 Administration Manual page 38

Feature Programming Chart [continued)
Feature Name
(Suggested Button Label)
Manual Signaling
Privacy
Do Not Disturb
Programmable Shift
Loudspeaker Page
Touch-Tone Enable
Call Coverage
Secondary Coverage
Ring Option Override
Message
Description
Generate a beep at
another person's voice
terminal.
Prevent people from ac-
cidentally joining your
calls.
Temporarily prevent calls
from ringing at your voice
terminal.
Use this button to program
two features onto each but-
ton to the right of the dial
pad.
Use your business' loud-
speaker paging system to
make announcements to
all or some of your
co-workers.
If your system has lines
that carry rotary pulse
signals, you can switch to
Touch-Tone signals to use
services such as alternate
long distance or credit
card authorizations.
Receive calls for someone
who is unable to answer
his or her voice terminal.
Receive calls, after a delay,
as a backup for a co-
worker who covers some-
one else's calls.
Use this button when you
want all calls to ring im-
mediately at your voice ter-
minal, even if it is pro-
grammed to ring after a
delay or not at all.
Have your MERLIN
system attendant notify
you when you have a
message.
Programming Code
Dial *6.
Dial the intercom
number for the person
you want to contact.
Dial *72.
Dial *71.
Dial *79.
Dial *91 + a paging
code:
80 for all zones
81
zone 1
82 zone 2
83 zone 3
Dial *76.
Dial *4.
Dial the intercom
number of the person
you want to cover.
Dial *5.
Dial the intercom
number of the person
you want to cover.
Dial *78.
Dial * 98.
Notes
Use Manual Signaling to contact
someone with a prearranged
signal. If you program this
feature on a button with lights,
the green light goes on when the
other person is using his or her
voice terminal.
Needed only if you share lines
with other people. Requires a
button with lights.
Requires a button with lights.
For 34-button voice terminals
only. Must be programmed on
one of the buttons above the dial
pad.
Used only with loudspeaker
paging equipment.
For rotary lines only.
Requires a button with lights.
You can program up to five
Cover buttons.
Requires a button with lights.
You can program up to five
Cover buttons.
Requires a button with lights.
For 5-button voice terminals
only. Requires a button with
lights.
37