Fluke 125
Users Manual
Selecting a measurement function.
To choose a frequency measurement for Input A, do the
following:
Open the A MEASUREMENTS
menu.
Highlight Hz....
Open the Hz-RPM submenu.
2-6
Highlight Hz.
Accept the Hz measurement.
Observe that Hz is now the main reading. The former main
reading has now moved to the smaller secondary reading
position. (See Figure 2-8.)
To choose also a Peak-to-Peak measurement for Input B,
do the following:
Open the B MEASUREMENTS
menu.
Highlight ON.
Turn Input B on. Observe that the
highlight jumps to the present
main measurement.